Charging Current: 12V STD/AGM/ C Mode ): 8A 12V Maintenance Mode ：1 A 12V LFP Mode ：8A 12V Recond Mode :1.5A 6V STD: 2A SUPPLY ：7A Battery Voltage: 6V/12V Voltage AC: 110-120VAC/ 220-240VAC,50-60HZ Charging type: 10-Steps,Fully automatic Cable Length: 1.5M Battery Capacity: 4-200Ah Insulation class : IP65 Indication: LCD Battery Type : All type 6V/12V Lead-Acid Battery &12V LiFePO4 Battery 1)8/1Amp Battery Charger & Maintainer features to help optimize the performance and life of your battery 2) Fully automatic, microprocessor-controlled 10- step charging process ensures a safe, fast and thorough battery charge 3) Recommended for charging and maintaining batteries rated 4 to 120 Ah . 4) Suitable for all 6-volt and 12-volt lead acid battery chemistries including flooded (wet), maintenance-free, AGM and gel cell. Suitable for 12V LifePO4 batteries . 5) MCU (Microprocessor Controlled Unit) and Intuitive LCD indication. And Stops charging automatically when battery is fully charged or topped off, switching to float mode monitoring. 6) A selectable Reconditioning mode can be used periodically to help restore batteries suffering from capacity loss due to sulfation and stratification 7) Retains last selected mode in memory so in the event AC power is disrupted (e.g. power failure) the charger will re-start in the last selected mode once power is restored 8) With battery voltage test function: At AC no connected, clamps connected to the battery, shows the reality battery Voltage (from 8V to 15V). 9)A selectable Power Supply mode provides power that can be used to maintain vehicle memory settings during battery replacements or revive zero-voltage batteries 10) Energy efficient switch-mode technology makes it compact and lightweight 11) IP65 rating for water, dirt and dust resistance 12) Design with Hook for easy use
